How to install a ceiling medallion (US guide)

A US step-by-step guide to installing a ceiling medallion, with tools, sizing in inches, adhesive and screw fixing, caulking, NEC box weight rules and plaster versus polyurethane.
Flare Studio illustration: How to install a ceiling medallion (US guide)
Flare Studio illustration: How to install a ceiling medallion (US guide)

Quick answer
To install a ceiling medallion: turn off the power at the breaker, remove the light fixture, clean the ceiling, test-fit the medallion over the electrical box (cutting the center hole if needed), apply construction adhesive or adhesive caulk to the back, press it up and secure it with trim screws into the joists while it sets, caulk the edge and screw holes, paint, then remount the fixture [1][5]. The fixture must hang from the electrical box, never from the medallion [2][3].

A ceiling medallion (in Britain, a ceiling rose) is one of the quickest ways to make a light fixture look intentional and a room look finished [4]. This guide is written for US homes, with inches, drywall and junction boxes. If you are in the UK, see our UK fitting guide.

Section through a ceiling: joists, drywall, an electrical box, the medallion fixed with adhesive and screws, and the light canopy 123456
  1. 1 Ceiling joists
  2. 2 Drywall or plaster ceiling
  3. 3 Electrical (outlet) box fixed to the structure
  4. 4 Medallion bonded with adhesive
  5. 5 Trim screws into joists while the adhesive sets
  6. 6 Fixture hangs from the box, not the medallion
How it fits A cut-through view of a medallion installation. Drawn by Flare Studio.

What you need

  • The medallion, with a center hole sized for your box or cut to suit.
  • Construction adhesive or adhesive caulk.
  • Trim-head screws (or finish nails) long enough to reach the joists.
  • Painter's caulk and wood filler, sandpaper, paint.
  • Voltage tester, screwdriver, step ladder, and a helper.

Step by step

  1. Turn off the power at the breaker box and confirm with a voltage tester [1].
  2. Remove the fixture and its canopy; support the fixture so it does not hang by its wires.
  3. Clean the ceiling around the box: scrape loose paint and old caulk, wipe with mild soapy water [1].
  4. Test-fit and cut. If the medallion has no center hole, mark the canopy outline and cut a hole about 1/2 in inside it, so the canopy will cover the edge [1].
  5. Paint first if you can; it is easier on the ground [1].
  6. Apply adhesive to the back, center it over the box and press firmly [1].
  7. Screw it while it sets. Drive trim screws into the joists, then fill the heads [1].
  8. Caulk the edge where it meets the ceiling; smooth with a damp finger.
  9. Reinstall the fixture on the box, restore the power and test.

What size medallion?

Van Dyke's suggests a medallion about the same diameter as the fixture for a subtle look, larger for a bolder look, and larger again on high ceilings because they draw the eye upward [1]. A useful starting point in a living or dining room is a medallion roughly one-tenth of the room's longest dimension.

Room size Ceiling height Medallion diameter
Small (10 x 10 ft) 8 ft 8 to 12 in
Medium (12 x 14 ft) 8 to 9 ft 12 to 18 in
Large (16 x 20 ft) 9 ft + 18 to 27 in
Grand rooms, chandeliers 10 ft + 24 in and up

Plaster, polyurethane or resin?

Medallions were originally plaster; most US medallions today are lightweight polyurethane or resin [1][4]. Plaster has sharper relief and a more authentic matte surface, but is heavier, so it relies more on good adhesive and screws into joists. Our medallions are hand-cast plaster; large ones weigh several kilograms (around 13 to 20 lb), so fix them into joists.

Shipping to the US

We ship plaster medallions to the US from our studio in Shrewsbury, England, with duties paid. Sizes are listed in inches on every piece. Note that our mains (hardwired) wall light variants are not shipped to the US.

Plaster medallions Hand-cast plaster medallions shipped to the US.

Watch the whole process from start to finish [5].

Video: Today's Homeowner with Danny Lipford, “How to Install a Ceiling Medallion”, via YouTube.

Good to know

Common questions

How do you attach a ceiling medallion?

With construction adhesive or adhesive caulk, plus trim screws into the joists while it sets.

Does a ceiling medallion hold the light?

No. The fixture must be supported by the electrical box.

What size ceiling medallion do I need?

About the fixture's diameter for a subtle look, larger for a bold look or high ceilings.

Can you install a medallion without removing the light?

Split medallions exist, but most installations remove the fixture so the medallion sits behind the canopy.

Sources

References and further reading

Harvard style. Web pages were checked on the access date shown.

  1. Van Dyke's Restorers (n.d.) Dress up your lights with decorative ceiling medallions. Available at: www.vandykes.com/dress-up-your-lights-with-decorative-cei... (Accessed: 14 November 2026).
  2. National Fire Protection Association (2023) NFPA 70: National Electrical Code. Quincy, MA: NFPA.
  3. LeBlanc, R. (2017) A weighty issue. EC&M, 16 October. Available at: www.ecmweb.com/national-electrical-code/article/20903072/... (Accessed: 14 November 2026).
  4. Calloway, S. and Cromley, E. (eds) (1996) The elements of style: a practical encyclopedia of interior architectural details from 1485 to the present. Rev. edn. London: Mitchell Beazley.
  5. Today's Homeowner with Danny Lipford (n.d.) How to install a ceiling medallion [Video]. YouTube. Available at: www.youtube.com/watch?v=ZxGzys4Yhjw (Accessed: 14 November 2026).

How to cite this article

van Locke, J. (2026) ‘How to install a ceiling medallion (US guide)’, The Flare Journal. Flare Studio UK. Available at: https://flarestudio.uk/blogs/journal/how-to-install-a-ceiling-medallion (Accessed: 16 November 2026).

Shop the style

All ceiling roses

See the collection

Conversation

Join the conversation

Questions about the history, a room you are planning, or a piece you have seen in the wild? Leave a comment and Joseph will reply.

Leave a comment

Comments are read by the studio before they appear. Your email is never shown.

Useful next

Guides for choosing, fitting and finishing

Flare Studio illustration: Buying handmade decor from the UK: shipping, duties and what to expect

2 min read

Buying handmade decor from the UK: shipping, duties and what to expect

By Joseph van LockeFounder, designer and maker
Flare Studio illustration: Colonial and Georgian Revival interiors: the British roots of an American classic

2 min read

Colonial and Georgian Revival interiors: the British roots of an American classic

By Joseph van LockeFounder, designer and maker
Flare Studio illustration: American Victorian house interiors (and their British roots)

2 min read

American Victorian house interiors (and their British roots)

By Joseph van LockeFounder, designer and maker